Norac UC4+BC+WR2 User Manual download pdf (Page 22)

ROP

4.7 ELECTRICAL INSTALLATION

1. Install the UC4+ Control Panel (E01) in the

cab of the sprayer. Mount the panel where

it will be clearly visible and within easy reach

of the operator.

A good spot to mount the UC4+ control

panel is on the right hand side of the cab to

the Roll Over Protection Bar (ROP). Four

pilot holes for the screws provided need to

be drilled to facilitate the control panel

mounting.

Another option is to purchase an adapter

for the flexible panel mount that has a 3/8"

NC threaded stud on the end to bolt

through an existing mount. You can find

these at your local outdoor store as a RAM

mount part number RAM-B-236. (See

http://www.ram-mount.com/)

Figure 22: Control Panel Mounting

ROP

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 30 31

No comments

Norac UC4+BC+WR2 User Manual Page 22